The RFID inlay is made up of two components?

The RFID inlay consists of two components. An integrated circuit or microchip that stores personal identifying information attaches to a small coil of aluminum, copper or silver wires called the antenna, which transmits and receives radio frequency signals. The microchip and antenna are then placed on a label, and the entire unit is encased in plastic.

The RFID inlay -- which can be as small as a grain of rice -- is the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses radio frequency waves to relay information to a computer system via an RFID reader.

RFID inlay -- which is often no more than a grain of rice -- could be the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses rf waves to relay information with a laptop or computer by using an RFID reader.

Types
RFID inlays are called "wet" or "dry." RFID inlays are viewed "wet" if an adhesive is applied towards the inlay to stick it into a pressure-sensitive liner that comprises the label. Inlays are believed "dry" if the inlay is coupled to the label without using an adhesive.

Components
The RFID inlay is made up of two components. An internal circuit or microchip that stores personal identifying information attaches with a small coil of aluminum, copper or silver wires referred to as antenna, which transmits and receives radio frequency signals. The microchip and antenna are then added to a label, along with the entire unit is encased in plastic.

The Ins And Outs
Data from your microchip passes to the RFID tag's antenna, where it really is read through the antenna associated with an RFID reader and passed onto a number pc for archival purposes, processing or analysis.

http://www.nfcandrfid.com/products_info/RFID-wet-dry-inlay-319918.html

The is smart card?

A smart card, chip card, or integrated circuit card (ICC) is any pocket-sized card that has embedded integrated circuits.Smart cards are made of plastic, generally polyvinyl chloride, but sometimes polyethylene terephthalate based polyesters, acrylonitrile butadiene styrene or polycarbonate. Since April 2009, a Japanese company has manufactured reusable financial smart cards made from paper.

Smart cards can be either contact or contactless smart card. Smart cards can provide personal identification, authentication, data storage, and application processing.Smart cards may provide strong security authentication for single sign-on within large organizations.

The LRI2K is operating in 13.56MHz frequency and with 2048-bit electrically erasable programmable memory (EEPROM). The memory is organized as 64 blocks of 32 bits.

The LRI2K is smart card accessed through 13.56 MHz carrier electromagnetic wave on what incoming data are demodulated from your received signal amplitude modulation (ASK: amplitude shift keying). The received ASK wave is 10% or 100% modulated having a data rate of just one.6 Kbit/s while using the 1/256 pulse coding mode or possibly a data rate of 26 Kbit/s while using the 1/4 pulse coding mode.
Outgoing data originate from the LRI2K load variation using Manchester coding with one or two subcarrier frequencies at 423 kHz and 484 kHz. Data are transferred in the LRI2K at 6.6 Kbit/s in low data rate mode and 26 Kbit/s fast data rate mode. The LRI2K supports 53 Kbit/s in high data rate mode with one subcarrier frequency at 423 kHz.

http://www.nfcandrfid.com/products_info/LRI2K-2K-memory-ISO15693-smart-card-319948.html

The bin tag is cost-effective waste management smart tag solutions?

The bin tag is cost-effective waste management smart tag solutions. It’s with RFID technology. Each durable bin tag offer superior resistance to water, salt mist mineral oil and petroleum as well as high tolerance to shock and temperature variations. Each tag is easily into standard nests manufactured into most waste bins. We supply LF, HF and UHF bin tags for your choices.
The bin tag perform exceptionally well, withstand abuse and help waste management organizations achieve optimal data integrity easily and efficiently.

Waste management utilizes RFID to uniquely identify waste bins. When the truck empties the bin, the tag is read and weighed, to accurately simplify billing according to the amount of waste was produced.

If you are currently using our paper bin tags but have registered with us you should have received an information package by post explaining how the new electronic  payment system will work and when you will be switched to it.

The is bin tag an automated prepay system and works on the same principal as prepay mobile phones. You top up your account with credit in advance, each time we empty your wheelie bin we deduct the cost from your account. The cost per lift is the exactly the same as the paper bin tag however there are much more benefits.

http://www.nfcandrfid.com/products_info/Bin-tag-319952.html

Custom Wristbands As Per Your Requirement

There was a time when wristbands were only used as a fashion statement, but now days this is not the case as these are being used for various purpose such as on different occasions, fundraiser activities and many more. One can find large variety of Bracelets in the market, but when it comes to wristbands and that too for some special or specific event we need custom wristbands.

At wrist-band.com you can find a large variety of wristband of different color and sizes.  Buy silicone wristband with us which are safe to wear and eye catching. Custom rubber bracelets we offer are designed for promoting your products or business. With us you can print whatever you want to get printed on the band, provide us details through some simple steps existing on our website. Along with promoting business these are also used for promoting cause and for fundraiser activities. Our silicone wristbands are also used to identify patients or to keep record of them. The user-friendliness of our website has been proven easier and time-efficient method of creating bulk orders of custom rubber bracelets.

At  wrist-band.com one can create a wristband with any figure printed like logo, specific outline or word art. If you are supporting any sports team or any political party get Rubber Bracelets created for your group and wear them. This will really show your enthusiasm for your favorite player, sports team and contestant.

Creating your personalized wristbands with us ensures you a quality product with fine prints. When talking about accessories, wristbands are most commonly used to spread any message around. Adding up to your style along with what's going on in your mind, we have wide range of online wristbands for you. We have a diversity of wristbands to add up to your style. Availability of such good quality online bracelet has eased the sellers to place bulk orders according to their requirement without any hassle. While customizing your bracelets you can see the preview of your band, provide the message to be printed and select the font you would like. For printing the figures, upload the logo and see how it will appear on the wristband.

All of our products are made with quality material and we assure our customers for a reliable and hassle free purchasing with us. So, don't keep your emotions inside, feel free to shop for your favorite wristband.  Once your order is placed and you provide us the production time in which you require your order manufactured. So, you are finally offered with completely customizable and reliable online shopping where you can create your own silicone wristbands.

http://www.nfcandrfid.com/products_info/RFID-silicone-wristband-319931.html

Present and Future of NFC

Near-field communication (NFC) is a short-range, wireless connectivity technology. It enables NFC-equipped devices to communicate and share data when they are close (less than four centimeters) to each other. It works similarly to Bluetooth and Wi-Fi, but there exist differences in range and underlying technology. NFC only works over very short distances. It makes use of electromagnetic radio fields to make connections; Bluetooth and Wi-Fi are based on radio signals.

Use of NFC Tags

There are four popular applications of NFC – (a) touch and confirm (passive mode), (b) touch and go (active mode), (c) touch and connect (P2P mode), and (d) touch and explore.

Touch and confirm is commonly used for credit card payments where a device is used to read data from the chip in a credit card. Tap points that are found on public transport turnstiles or billboards use active mode application of NFC. The P2P (peer-to-peer) mode lets users transfer data without the hassles of Bluetooth connectivity that forces users to first select a device and then enter a PIN associated with that device. Touch and explore lets users discover the capabilities of a device.

NFC applications

This technology is popular in Japan, where several large banks are using it for payment services. Google Wallet is another popular NFC-based service. Many new credit cards carry an NFC chip inside them. A large number of modern Android smartphones, particularly those made by Samsung, are NFC-capable.

Challenges

Apple has not endorsed NFC. It is working on a separate technology called Bluetooth Low-Energy (BLE). In a recent update to its Wallet, Google has warmed up to non-NFC devices' users. It is no longer mandatory to have an NFC-capable device to use Google's payment service.

Despite these high profile setbacks, the technology is far from being dead. There is a huge infrastructure available; far more extensive and widespread than for competing alternatives. Several large telecom operators – KDDI, NTT Docomo, and Softbank – already offer NFC payment services.

Future

The upward trend in NFC growth is unmistakable. This has led to research in more uses for this technology. Blackberry maker Research-in-Motion is already developing NFC for enterprise use; where it will complement traditional security systems. Governments across the world are testing this technology to improve public transport. France is currently leading here. NFC promises to make shopping experiences more personalized. The University of San Francisco already uses an NFC-based system that lets students building access and make payments. Alaska Airlines is thinking about replacing boarding passes with NFC. Dubai Metro uses NFC for their Nol Cards and have recently tied-up with Du and Etisalat to offer NFC SIMS to enable Mobile payment.

 Businesses and NFC

All these developments pose a unique opportunity for businesses; weather in London or Dubai. As NFC will become more widespread businesses will have to switch to it. Those who will embrace this technology in time will be better prepared to tackle future challenges.

http://www.nfcandrfid.com/products_info/NFC-card-319914.html

Weighing the Merits and Disadvantages of Contactless Cards

Gone are the days when the one thing that defined transactions in India was only through cash. We have moved way ahead and with the recent introduction of debit cards and credit cards, sending money to your long distance relative has become easier. Truly, India is moving forward and the recent technological innovation that has just been embraced by the Indians is of course, the "contactless cards". Payment through mobile wallets and othe online virtual softwares is the one simple way to which every online shopper has resorted to.

Contactless cards have been issued by many banks but the baton was taken by the ICICI bank. The bank introduced the contactless cards on 7th  January 2015. The upsurge in their popularity is evident as many banks have step forward to ensure that they develop this new technology and make it available for their customers too. The POS machine is common today and these are going to be soon replaced by the NFS enabled machines by SBI bank.

Contactless cards are being touted as the next generation payment methods because people won't have to physically touch their cards to pay for anything. This is already the case with virtual transactions but when it comes to shopping in malls, you won't have to input the PIN like you usually do.

This is possible due to the near-field-communication (NFC) technology that these contactless cards use. This technology helps in exchange of data between devices in the range of 10 centimetre. So, make any transaction you want by just tapping the card on a point-of-sale (POS) machine and it is done.

Now, you have a fair amount of knowledge about contactless cards but venturing into something new especially when it concerns your hard earned money can be daunting, so you should be aware of some of the major pros and cons of the contactless cards which are listed below.

The one reason why everyone would be shifting to the contactless cards is that they are convenient. Yes, they are convenient because you just have to tap it on the POS machine and in the near future, you won't have to do that also because the NFC enabled machines would be there. So, talk about convenience and there you go! These cards are perfect for use in demanding retail environments, like supermarkets, petrol stations, convenience stores, and quick-service restaurants.

Contactless cards are surely here to stay and impact the economy of Indian market in a huge way. But, there is a lot more work to be done on them.

http://www.nfcandrfid.com/products_info/Topaz-512-NFC-forum-type-1-tag-NFC-card-319971.html

UHF RFID inlay or RFID label with best-in-class performance over worldwide regulations?

UCODE 7 UHF RFID inlay offer high anti-collision rates, high sensitivity for long read range and wide frequency range for worldwide applications: Retail Inventory management, Supply chain management, Loss prevention and son so.

NXP UCODE 7 IC could be the leading-edge EPC Gen2 RFID chip that gives best-in-class performance featuring for usage from the most demanding RFID tagging applications.

Particularly perfect for inventory management application, like e.g Retail and Fashion, having its industry leading RF performance for virtually any given form factor, UCODE 7 enables long read distance and fast inventory of dense RFID tag population. Having its broadband design,it gives you an opportunity to manufacture true global UHF RFID inlay or RFID label with best-in-class performance over worldwide regulations.

http://www.nfcandrfid.com/products_info/UHF-RFID-inlay-NXP-UCODE-7-for-long-read-range-319979.html

What is card?

The MIFARE Ultralight EV1 MF0ULx1 to be used within a contactless smart ticket, smart card or token along with a Proximity Coupling Device (PCD). The MF0ULx1 was created to are employed in an ISO/IEC 14443 Type A compliant environment. Easy integration into existing infrastructures is accomplished from the compatibility with all MIFARE-based systems. NXP%u2019s integrated C originality check feature provides effective protection against cloning so it helps to stop the application of counterfeit tickets.

The modern popular features of MIFARE Ultralight EV1 such as three independent 24 bit one-way counters are enabling transport operators to integrate flexible ticket tariff schemes through enhancing trip counting, reloading, limited stored values and expiry date management.

One application example is the use of multiple counters for any zone- or mileage-based tariff scheme in the check-in / check-out system. Another application will be the smart blend of trip- and reload-counting. Furthermore, a new 32-bit password protects data from being accessed without authorization. The NXP originality signature enables vendor verification of each one single IC this contributes to a more reliable system and allows transport operators to spot and reject tickets that are not capable of be employed in Mifare Ultralight EV1 card the precise application.

http://www.nfcandrfid.com/products_info/Mifare-Ultralight-EV1-card-319974.html

What is smart card reader

Smart card reader is an electronic drive for reading and writing smart cards such as IC card, RFID card, etc. There are two types: contact smart card and contactless smart card. Know more what is a smart card reader below.

contactless smart card reader is the dedicated reader for the easy-to-use M1 card, it can read and write Mifare S50, S70 card with using the D8 core technology, connect with a PC and related equipment via RS232 serial or USB port, (USB hassel technology adoption). With more simple, stable and low cost, contactless smart card reader supplied various platforms Driver Development Kit, with full functionality demo program operable radio card and test card with automatic operation. D3 type smart card reader is the development of IC card related products and systems integration necessary front-end processing equipment, its rich, perfect interface functions that can be easily applied to industry and commerce, telecommunications, postal services, taxation, banking, insurance, medical, meeting attendance, various deductions cafe management, gas stations, parking management, etc. (such as parking fees charged) charges, stored value, query and other smart card management application systems.
Smart card reader instruction manual:
First, need to focus on the frequency range of the reading and writing device to the frequency of use to see the project meets its specification;
Second, to understand the reader's maximum transmit power and antenna matching selection whether excessive radiation;
Third, check the available number of antenna ports of reader, depending on the application to see if need multi-interface reader;
Fourthly, communication interface meets the needs of the project;
Fifth, the interpretation of distance and anti-collision indicators, reading from the index must be clear what the antenna and tag testing; anti-collision to be clear what label for how long and under what arrangement over the entire reading;
Sixth, in addition to an RFID application system and reader related, but also and tags, antennas, the material is tagged item is tagged item movement speed, ambient and other related before determining the best equipment can simulate site conditions testing and validation to ensure that the product really can meet the application requirements;
Seventh, in the case of continuous simulation test stability of the equipment, to ensure long-term stability work.

Smart card reader read card is divided into contact and contactless. Contactless smart card reader as long as a valid card reader reading distance within the range of tasks to complete the card reader, the example is Syncotek SK-600P smart card reader, contact smart card reader (such as Syncotek Sk-285P) needs the contact with card and reader to complete the task, but it is divided into several reader modes,

The contact chip card is recognized by the gold colored contact plates that are located on the top of the charge card. It’s used by inserting in it to a device which has a specifically designed slot to learn it. Home plate generates the vitality essential for the various readers to identify it.

Contact chip card is usually found in indoor office locations. This is the height and width of smart card and utilized for network security, government/student identification and electronic cash.

http://www.nfcandrfid.com/products_info/Contact-chip-card-319923.html

Plastic Loyalty Cards: the Loyal Plastic Card

Plastic cards. They are not new. But what is interesting is that companies are increasingly seeking new and innovative ways to utilize plastic loyalty cards for a long lasting branding impression, in addition to specific messaging.

Retailers use this concept well. They know that providing an offer on a plastic card instills loyalty, card retention, brand re-identification and a "top of mind": awareness that is powerful and unique. After all, these plastic cards, especially when wallet-sized, can be truly thought of as "wallet sized wonders." They are durable, memorable and kept for a long time.

The power and flexibility of loyalty cards is as adaptable as the customer wishes it to be. These cards lend themselves to a wide variety of business situations that is quite impressive.

Plastic cards provide marketers with a tremendous array of options. It is now possible to wave a wristwatch and have your car all gassed up. You can flip a keychain and quickly pick up that latest bag of fast food. Flash your plastic when entering the gym your next month's fee is paid.

The loyalty engendering aspects of plastic cards are especially interesting. Marketers know that value-based offers embedded within plastic cards promote a high branding awareness while encouraging additional, ongoing business.

Credit card issuers are especially skilled at exploring new and innovative methods of enabling plastic cards to promote loyalty and more frequent use. There is a definite appeal to offering fast transactions for mobile, time sensitive, on the go consumers. When you add to that the capacity for incentives based on repeat visits, value-based incentives and the loyal patronage that results, the card issuer has a winning and powerful marketing tool.

Credit card customer churn is forcing card companies to intensify their efforts with customer loyalty. Nearly every adult American has at least one credit card. Meanwhile, issuers are hoping that the availablility of new and innovative ways to use these cards will promote usage and brand loyalty. As plastic loyalty cards continue to evolve, consumers might discover that the familiar wallet-sized shape is changing. The basic purpose and functionality of these cards, however, will always remain the same.

Many leading plastic card manufacturers have excellent capabilities to produce and customized all types of plastic loyalty cards. Visual Products Inc. for example, is a direct-to-the-industry manufacturer that also has its products available for purchase by businesses and consumers.

http://www.nfcandrfid.com/products_info/Membership-card-319957.html

Develop your knowledge about EAS Hard Tags

The EAS Hard Tags understand that all retailers are different from one another. Furthermore, their purchasing decisions are also directed by depending on the market position, brand emphasis, the loss prevention strategy, products sold and lasted but not the least budget. Therefore, to supply the global market in an extensive way, manufacturing units are carrying hundreds of hard tag solutions to the retail establishments.

All the EAS Hard Tags are manufactured with optimum quality and utmost care to ensure compatibility with all modern day used EAS systems. Of which it ensures that all the retailers' merchandise are well-protected from shoplifting.

The EAS Hard Tags are effectively removed by only means of a detacher. In order to remove the hard tag, it should be pushed downwards to the horizontal position. The detacher is having a magnetic field that attracts the magnet inside the hard tags and thus, it removes the tag successfully without affecting the garments. By doing so, it will depress the two micro-switches in the detacher trigging the detaching hook. It is vital to ensure that the PIN of the hard tags is not stored nearer to the tag after getting detached from the garments at the point of sale.

Once the EAS tag has been removed from the garments or items, it is very much significant that they are handled carefully in order to avoid needless damage because of carelessness.Below are some of the effective suggestions for handling the EAS AM Systems that will minimize the damage and helps to increase the ease of handling while reducing the cost of the retagging cycle.

http://www.nfcandrfid.com/products_info/Mini-tag-319960.html

What is Soft UHF laundry tag?

If you are finding RFID laundry solutions, this UHF laundry tag which is a very good ideal choice. It is made of silicone material and very soft which can be silkscreen number or 1-2 colors logo. And it is important the price is very reasonable with super read range if you use UHF chips for UHF laundry system.
You don’t need to think how to tracking clothing, laundry tagging system with RFID laundry can help you to solve all problems and tracking the clothing, towel , garments in laundry stores, hospitals, companies for identification the uniform clothing.

N&R is a leading supplier of smart cards and RFDI tags for global system integrators and distributors. We offer a wide range of RFID tags with contact chip or contactless chip (LF, HF, UHF) ,such as ISO CR80 card, wristband, key fob, disc tag, laundry tag, tire tag ect. They are widely applied in different kinds of applications. For examples: access control, smart payment, loyalty system, assets tracking, identifications, time and attendance management.

http://www.nfcandrfid.com/products_info/Soft-UHF-laundry-tag-319970.html

What is the card reader type?

A card reader is a data input device that reads data from a card-shaped storage medium. The first were punched card readers, which read the paper or cardboard punched cards that were used during the first several decades of the computer industry to store information and programs for computer systems. Modern card readers are electronic devices that can read plastic cards embedded with either a barcode, magnetic strip, computer chip or another storage medium.

A memory card reader is a device used for communication with a smart card or a memory card. A magnetic card reader is a device used to read magnetic stripe cards, such as credit cards.A business card reader is a device used to scan and electronically save printed business cards.

This device is hand swipe operated magnetic card reading machine with USB interface. They comply with ISO-7811, 7812 magnetic card decoding standard completely. It could read card bi-directionally, has intelligent lights to alert if card information is read correctly. Exquisite magnetic installation structure makes card reading more stable and reliable, that is our patented technology. Reasonable product design makes products small, and compact. It's only-read function.

http://www.nfcandrfid.com/products_info/Magnetic-card-reader-319920.html

What is magnetic card?

A magnetic stripe card is a type of card capable of storing data by modifying the magnetism of tiny iron-based magnetic particles on a band of magnetic material on the card. The magnetic stripe, sometimes called swipe card or magstripe, is read by swiping past a magnetic reading head. Magnetic stripe cards are commonly used in credit cards, identity cards, and transportation tickets. They may also contain an RFID tag, a transponder device and/or a microchip mostly used for business premises access control or electronic payment.

Magnetic recording on steel tape and wire was invented during World War II for recording audio. In the, magnetic recording of digital computer data on plastic tape coated with iron oxide was invented. In used the magnetic tape idea to develop a reliable way of securing magnetic stripes to plastic cards,under a contract with the US government for a security system. now define the physical properties of the card, including size, flexibility, location of the magstripe, magnetic characteristics, and data formats. They also provide the standards for financial cards, including the allocation of card number ranges to different card issuing institutions.

A magnetic card is a rectangular object that contains sometimes a magnetic strip on the outside or even a magnetic object inside card which contains data. A magnetic card may contain information about somebody such as available credit or pass codes for entering secure buildings. The image is one particular Magnetic card being swiped through a magnetic card reader.

A magnetic card is a type of card capable of storing data by modifying the magnetism of tiny iron-based magnetic particles on a range of magnetic material for the card. The magnetic stripe, sometimes called swipe card or magstripe, is read by swiping past a magnetic reading head. Magnetic stripe cards are commonly found in credit cards, identity cards, and transportation tickets. They could also contain an RFID tag, a transponder tool andAndor perhaps a microchip mostly used for business premises access control or

http://www.nfcandrfid.com/products_info/Magnetic-card-319935.html

What type of RFID wet / dry inlay?

RFID inlay -- which is often no more than a grain of rice -- could be the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses rf waves to relay information with a laptop or computer by using an RFID reader.

Types
RFID inlays are called "wet" or "dry." RFID inlays are viewed "wet" if an adhesive is applied towards the inlay to stick it into a pressure-sensitive liner that comprises the label. Inlays are believed "dry" if the inlay is coupled to the label without using an adhesive.

Components
The RFID inlay is made up of two components. An internal circuit or microchip that stores personal identifying information attaches with a small coil of aluminum, copper or silver wires referred to as antenna, which transmits and receives radio frequency signals. The microchip and antenna are then added to a label, along with the entire unit is encased in plastic.

The Ins And Outs
Data from your microchip passes to the RFID tag's antenna, where it really is read through the antenna associated with an RFID reader and passed onto a number pc for archival purposes, processing or analysis.

http://www.nfcandrfid.com/products_info/RFID-wet-dry-inlay-319918.html

Custom Wristbands Have Become A Fundraising Standard Worldwide

Custom wristbands have been fashionable for nearly a decade. Since the introduction of the classic yellow silicone bracelet imprinted with the word Livestrong, they have become iconic symbols of charitable causes worldwide.

The key the success of custom wristbands as fundraising items is their extraordinarily low production cost. They can be mass produced for pennies, and sold at a relatively low price, making them affordable to just about anyone who wants one. Because custom wristbands cost so little to make, the per-unit profit margin is very high and adds up quickly to a significant contribution to the desired cause.

People also appreciate custom wristbands because they are looking for ways to support causes they consider important. Buying custom wristbands and wearing them is an easy way for people to support environmental issues, disaster relief efforts, medical research or other things they care about.

The detractors are right in one respect. Buying custom wristbands doesn't do much individually. But collectively, the amount adds up. And many people are simply unable to do more.

Embossed custom wristbands raise the lettering above the wristband surface, the opposite of the debossed bands. These wristbands draw more attention to the text.

For reproducing corporate logos and trademarks exactly, silk screen printed custom wristbands are the solution. These have the message printed directly onto the flat surface of the silicone bands. These custom wristbands feature a bright look and showcase logos and text with a photo-quality image. However, because the message isn't imprinted into the silicone, these will be less durable than other wristband styles.

http://www.nfcandrfid.com/products_info/RFID-disposable-wristband-319919.html

What is Round clothing security tag?

Round clothing security tag which is wildly used for clothing, towel , bath towel shop security. Now there are many retail stores are using clothing security tags. It is application for checkpoint systems and all 8.2MHz systems. The round tag is also known as the Mini tag or Mini square. It is uses a three locking ball System to secure the pin. This security tag with cheap price and it can be recycle used. It is very good ideal as anti-shop clothing security tag.

When my Mom brought home her new pair of gloves, which she paid for not stole, she went to use them and found that the security tag (non-ink one) was still attached.

Round has a large range of discounted security tags for fashion retailers to provide anti-theft protection to all clothing such as jeans, dresses, tops and jackets. Round security tags could also be applied to fashion accessories like handbags, belts, jewellery and sunglasses.

While the clothing security tags are the main seller industry-wide, retailers are not bound to its traditional ‘pin and clip to fabric’ application. Security tags can be adapted to fit most miscellaneous merchandise with a lanyard or Versa Pin and Hook pins. Round security tags may then be applied to protect such merchandise as sporting equipment, household electrics and toys.

Security tags work by attaching it securely to the merchandise to be later removed or detached by the sales assistant by a powerful Superlock magnetic detacher at the point of sale. Attempted theft with the security tag in place will sound an alarm at the security gates at exit.

http://www.nfcandrfid.com/products_info/Round-Clothing-security-tag-319967.html

What Is The Stripe On the Credit Card?

Each day we use our bank issued credit card. Swiping our cards on stores card readers to buy our purchases. Now, how it is that something so small can keep all your bank information. What allows the card reader to see that information? And what is that dark strip on the back of our cards.
The stripe on the back of a credit card is a magnetic stripe, or also called “Mag Stripe”. The magnetic strip is made up of tiny iron-based magnetic particles in a plastic-like film

The magnetic stripe can have data written because the tiny magnet bar can be magnetized in either a north or South Pole direction. The magnetic strip very similar to a cassette tape.
A magnetic stripe card reader can then understand the information that has been written on the three-track stripe.

With while direct Internet attachment uses much higher speeds via this protocol. Using Internet protocol, the cardholder enters their personal identification number using a pin pad.
The EM4200 card is not on the card -- it is encrypted in the database. Creation of your PIN can be interred in on the bank's computers in an encrypted form.

Also, the communications between the EM4200 card and the bank's central computer are encrypted to prevent would-be thieves from tapping into the phone lines, recording the signals sent to the to authorize the dispensing of cash and then feeding the same signals to the to trick it into unauthorized dispensing of cash.
If all of this isn't enough protection, there are now cards that utilize even more security measures than your conventional credit card: Smart Cards.

http://www.nfcandrfid.com/products_info/EM4200-card-319951.html

Use RFID coil antennas use?

RFID coil antennas suitable for a variety of applications. Products include 5.4GHz SMD reeled PCB mounting wideband antennas, Micro RWD MF modules for interface to antenna coils and antenna products for interfacing and two-way communications with low-frequency 134.2kHz Texas Instruments transponders and tags.

RFID reader. The reader is really cheap, and fits my porpoise, its recognized as a USB keyboard.

My Idea is to build a new antenna that can be fitted into a PVC tube and have a usb "reading rod". Basically I want to make a new coil with copper cable which area is a rectangle instead of a square.

The antenna coil and passive components form the tuned RLC circuit, which is designed to resonate at the 13.56 MHz carrier frequency and have a Q factor of 35-40. For the 125 kHz family of MicroRWD modules, the low Q antenna (700uH) has a relatively wide tolerance of inductance so the capacitor components are fixed and mounted on the RWD module itself pins AN1 and AN2 connect to an external antenna coil directly. For the 13.56 MHz MicroRWD modules, the antenna Q is higher and the inductance tolerance is narrow. For this reason the capacitor components are external to the module to allow fine-tuning and adjustment of the LC circuit as shown below. The external resistors are used to limit the antenna current and correct the antenna Q to 35-40 range.

N&R is a leading supplier of smart cards and RFDI tags for global system integrators and distributors. We offer a wide range of RFID tags with contact chip or contactless chip (LF, HF, UHF) ,such as ISO CR80 card, wristband, key fob, disc tag, laundry tag, tire tag ect. They are widely applied in different kinds of applications. For examples: access control, smart payment, loyalty system, assets tracking, identifications, time and attendance management.

http://www.nfcandrfid.com/products_info/ISO15693-RFID-coil-antenna-319941.html

What's are NFC sticker?

NFC isn't a fundamentally groundbreaking technology. Like Bluetooth and WiFi, it's a wireless radio communications standard. In the wireless world, NFC's closest relative is actually RFID (radio frequency identification). Retailers and parcel shipping companies in particular love RFID as a way to keep tabs on inventory supplies and shipments. You can read all about it in How RFID Works.

As a technology, NFC is very flexible. It can run only within a short distance, it is a low-friction connection. Whenever you have two embedded NFC chips terminals together, they will connect to each other. Do not need to enter a password or make setting, you just need to two NFC tags close to each other. NFC chips can be embedded into the two terminals, white NFC tag information will be Stored pages or contact information.

NFC sticker which could be also call NFC mobile tag, RFID market is emerging as a mobile NFC payment tag, compared to the RFID cards and RFID tags, NFC sticker is more portable and easy to carry. It can be attached to the mobile phone case or inside the phone. It is widely used in member points, identification system and NFC payment.

NFC sticker is a passive device that can be used to communicate with the active NFC device (active NFC reader). NFC tags can be used within the application of, for example, posters, and other small amounts of data stored and transmitted to the active NFC device applications. In the poster, the operative parts of the contact points can be used for the active device.

NFC stickers contain the stored data may be in any form, but is generally used to store address (URL) for NFC sticker devices find further information. Small amount of data required, you can use NFC tags.

http://www.nfcandrfid.com/products_info/NFC-sticker-319909.html

What are smart card

A smart card resembles a credit card in size and shape, but inside it is completely different. First of all, it has an inside -- a normal credit card is a simple piece of plastic. The inside of a smart card usually contains an embedded microprocessor. The microprocessor is under a gold contact pad on one side of the card. Think of the microprocessor as replacing the usual magnetic stripe on a credit card or debit card.

The SLE4428 is really a standard, low-cost EEPROM memory smart card with 1Kbyte space for storing. It is a protected smart card that contains 1,024 bytes of EEPROM memory. After eight successive incorrect entries the error counter will block any subsequent work for balance PSC verification thus any possibility to write and erase. It is no doubt that provides feeling of secure for your users. SLE4428 is now replaced with SLE5528. SLE5528 is 100% functional compatible to SLE4428.

http://www.nfcandrfid.com/products_info/SLE4428-Smart-Card-1k-Byte-319976.html

What is door and device?

This chapter describes how to create and modify door and device templates. Device templates define common settings for device types, such as Gateways, readers and locks. Door templates define common settings for door configurations, including the devices that are attached to the door.

If you’ve ever been inside an airport, university campus, hospital, government complex, or office building, you’ve probably seen one of HID’s brand of card readers standing guard over a restricted area. HID is one of the world’s largest manufacturers of access control systems and has become a ubiquitous part of many large companies’ physical security posture. Each one of those card readers is attached to a door controller behind the scenes, which is a device that controls all the functions of the door including locking and unlocking, schedules, alarms, etc.

N&R technology supplies many different styles of RFID key fob. And with kinds of material for the RFID key fob. Including ABS, plastic, PVC, PVC+EPOXY, Leather, Metal material.

The RFID key chain which we provide is water proof and dust proof. It is durable use and easy carry. They can be printed 1-2 silk-screen logo or laser number on the RFID keyfob. And if you need to have nice designing image on the RFID key fob (full color printing). You can choose the PVC material keychain or Jelly tag ( EPOXY key fob).

http://www.nfcandrfid.com/products_info/RFID-key-fob-319924.html

What are RFID jewelry tag?

RFID jewelry tag is managed object for small RFID label designed. Born jewelry tag makes the management of small items easy, fast, accurate and effective to improve management efficiency.
Jewelry labels beautiful and generous. Due to the special nature of the material, waterproof, anti-scratch, abrasion resistance and other characteristics, widely used in jewelry counter display, improve product quality, but also for watches, glasses and other various industries.

While the Low Frequency and High Frequency Jewellery Tags provide excellent control and defense against theft, the new RFID jewelry tag can eliminate theft!

Using the RFID jewelry tag Fixed reader and antennas with timed tag reads, when a tag leaves the read zone an alarm will sound and the system will show the location and direction that the tag moved in!  No longer can someone take a piece of expensive jewellery and try to hide it on their person or take the tag off and then hide the jewellery.  

The new RFID jewelry tag are the ultimate in protecting valuables and extremely cost effective!  For more information on the new SkyRFID Jewellery Tags or our standard line of Jewellery Tags fill out the form below.

RFID jewelry tag technology are constantly emerging to solve an age old problems across industries. In the retail industry, every store has inventory which may range into the thousands, even hundreds of thousands of pieces and dollars. Jewelry stores have millions of dollars invested in thousands of earrings, necklaces, and bracelets. With RFID jewelry tags, accurately tracking inventory becomes a viable option.

http://www.nfcandrfid.com/products_info/RFID-jewelry-tag-319917.html

What are the benefits of using the RFID bolt tag?

RFID blot tag which is with IP67 passive 125KHz or 13.56MHz passive tag. And it is suitable for kinds of RFID asset management, machine identification, vehicle license plate, metal container management ect

Description:
-Dimension: M12*20MM
-Frequency: 125KHz / 13.56MHz (ISO15693)
-Read/Write: 100,000 times
-Life: 10 Years
-Material: ABS
-Read range: HF 1-8cm; LF 1-6cm (Depends on the power of reader)

Chip available:
EM4200, EM4100, TK4100, EM4305, T5577, TI2K, ICODE2 and so on

N& R are the main supplier of RFID passive tag. We provide many types of RFID tags, which including RFID key fob, RFID wristband, RFID luggage tag, NFC sticker, RFID label, coin token, RFID laundry tag, tire tag, bolt tag ect.

http://www.nfcandrfid.com/products_info/RFID-bolt-tag-319943.html

What is Plastic luggage tag?

This is a rigid, white plastic luggage tag holder with a clear front and includes a 6" worm loop. Easily insert your business card or photo ID into the holder which is protected by a clear plastic insert that is completely see through to protect your card in the holder and keep it visible. Insert the loop strap through the hole at the top of the luggage tag holder and your card is securely locked into place and your luggage tag can easily be attached to your suitcase, brief case, guitar case or anywhere else that you may need a luggage strap. Designed to hold a standard size business card and also works great with a photo ID.

This rigid plastic luggage tag holder, part number comes with a clear front and includes a 6" worm loop. Easily insert your business card or photo ID into the holder which is protected by a clear plastic insert that is completely see through to protect your card in the holder and keep it visible.

Slide the loop strap through the hole at the top of the luggage tag holder and your card is securely locked into place and your luggage tag can easily be attached to your suitcase, brief case, guitar case or anywhere else that you may need a luggage strap. Luggage tag dimensions are and they are designed to hold a standard size business card and also works great with a photo ID.

It is a smart way to choice Plastic luggage tag with your custom size and custom design printing. You can use our available mould to print plastic luggage tag such as CR80 ,CR80 with 3 key tags, combo card CR80 1-keytag, combo card CR80 2-keytags ect. If you have a good ideal of custom size for printing plastic luggage tag. That will be better. We can make a new die cut for you. It is only for you. Enquiry us today, we will reply you in 24 hrs.

http://www.nfcandrfid.com/products_info/Plastic-luggage-tag-319910.html

Benefits of using RFID inlay?

The RFID inlay production unit, which comprises “pick-and-place” equipment to apply the chip to the antenna on the inlay, offers very considerable production capacities. In addition, this production unit has conversion, gluing and printing machines to produce quality RFID labels. Strict quality control is carried out at all stages of the production process.

The RFID inlay -- which can be as small as a grain of rice -- is the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses radio frequency waves to relay information to a computer system via an RFID reader.

The RFID inlay consists of two components. An integrated circuit or microchip that stores personal identifying information attaches to a small coil of aluminum, copper or silver wires called the antenna, which transmits and receives radio frequency signals. The microchip and antenna are then placed on a label, and the entire unit is encased in plastic.

RFID inlays are classified as "wet" or "dry." RFID inlays are considered "wet" if an adhesive is applied to the inlay to adhere it to a pressure-sensitive liner that comprises the label. Inlays are considered "dry" when the inlay is attached to the label without the use of an adhesive.

The RFID tag in a smart label. The inlay is adhered to the back side of the label and printed and encoded in an RFID printer. See RFID tag, RFID reader, RFID printer and RFID.

http://www.nfcandrfid.com/products_info/QR2213-HF-RFID-inlay-ISO14443-7-byte-UID-319987.html

UHF RFID tire tag for tyre management solution

RFID tire tag, there is provided a spring-type electronic tag antenna structure, while improving the robustness of RFID tire tag from the components connected to the structure and working methods to ensure that the electronic labels can withstand tire processing and use in the process of high temperature, various stresses and flexing deformation, and not with tire delamination throughout the life cycle of the tire so that it can properly communicate with an external reader device in the whole life cycle of the tire. The RFID tire tag mainly consists of specially shaped substrate mounted on the substrate in the RF module and a pair of helical springs extending antenna. After special processing of the substrate, the RF module and the antenna through a certain process are welded together, fully applicable to the whole life cycle of the tires.

RFID Tire tag operating in the frequency band of 860 to 950MHz. The tag has been tested under the most difficult conditions in Nascar racing cars and also can be built into truck tires that can be recapped several times. It is designed to be embedded into the tire mould prior to the manufacture and curing of the tire. This lightweight RFID tire tag, model 116042, survives the high temperatures encountered in the tire curing process and is sturdy enough to remain operational throughout the life of the tire.

http://www.nfcandrfid.com/products_info/UHF-RFID-tire-tag-for-tyre-management-solution-319956.html

Five Things You Must Know About Contactless RFID Credit Cards

For decades, credit cards have relied on magnetic stripes located on the reverse side of the card to store data. To transmit this data, the card must be swiped through a magnetic reader, making physical contact with the stripe. A contactless credit card, on the other hand, stores its data on a chip embedded in the card's plastic. This data is transmitted not magnetically, but rather via a tiny radio signal when the card comes in close proximity of a special reader at the checkout stand. This works through radio frequency identification technology, also known as RFID. When the chip comes close enough to the reader, an antenna on the chip is jolted to life by the electromagnetic field created by the reader, and transaction data is sent to into the system.

For starters, these RFID credit cards are much faster and more convenient than traditional magnetic stripe cards. A cardholder simply waves the card over the reader, waits a moment for the acceptence signal from the machine, and that's it. There's no need to fumble for cash, and with transactions under , there is no need to key in a PIN code or sign a receipt. Just wave and go. Also, since the card never leaves the user's hand, it is considered by some to be more secure.

NTAG216 chip with large capacity of 888 bytes(user programmable read/write memory) which is designed to fully comply to NFC Forum Type 2 Tag and ISO/IEC14443 Type A specifications.
NTAG213, NTAG215 AND NTAG216 from now on, we generally called NTAG21x. These 3 chips are particularly tailored for applications requiring small footprints, without compromise on performance. Small NFC tags can be more easily embedded into such as labels, contactless cards or electronic devices.

http://www.nfcandrfid.com/products_info/NTAG216-chip-contactless-card-319947.html

Cosmetic Security label

This EAS RF label is designed for the cosmetic to sure the security. It is very great security label which is sticker on the cosmetic. It is transparent and small very suitable for sticking on the outside of cosmetic. You can through clear window label see the barcode.
Cosmetic security label with standard EAS 8.2MHz frequency. It is compatible with checkpoint and other 8.2MHz Radio Frequency anti-shopping system.

Cosmetic Security label West can print your custom cosmetic labels on a large variety of textured papers and textured films to give your products the unique look they need to stand out in the marketplace.

Use kraft paper for a natural look, or pearlescent papers to add glimmer to your design. We can put what's inside your containers in the spotlight with no-look labels that use a special ultra-clear film that resists bubbling. Ask us about our textured film options-a combination of durable, waterproof strength and paper-like feel and texture.

Once you've chosen a base material, our finishing choices help lock in the look of your custom health and beauty labels. Our waterproof and chemical resistant laminations and varnishes come in a variety of looks, including gloss, matte, satin, and pearlescent. You can get tactile options, too, such as coarse matte or satin soft-touch varnishes. Contact us for free label samples!

Fundamentals of RF radio (RF) system is the existence of a fixed frequency (8.2MHz) detected by the RF antenna effective soft goods, hard tags to achieve security purposes. The physical basis of the detection antenna emits electromagnetic waves with a frequency of 8.2MHz, 8.2MHz when the natural frequency of the soft and hard tag (actually a natural frequency of 8.2MHz of LC oscillator circuit) enters the detection area, is excited with the frequency of the electromagnetic wave generating stimulated shocks. Resonant tag will result from the detection antenna gain energy, this energy causes the shock generator (detection antenna) circuit generates an instantaneous change in voltage or current. This current change will be detected, and thus generate an alarm signal. Now widely used in supermarkets, department stores. Its advantage is the shape of a radio antenna system is Cosmetic Security label relatively lightweight, protection channel width wider. But the drawback is also very prominent radio system. The most deadly is the soft sign afraid foil and metal packaging, namely fear metal shield.

http://www.nfcandrfid.com/products_info/Cosmetic-Security-label-319962.html

What are memory ISO15693 smart card?

The LRI2K is operating in 13.56MHz frequency and with 2048-bit electrically erasable programmable memory (EEPROM). The memory is organized as 64 blocks of 32 bits.

A smart card is a device that includes an embedded integrated circuit that can be either a secure microcontroller or equivalent intelligence with internal memory or a memory chip alone. The card connects to a reader with direct physical contact or with a remote contactless radio frequency interface. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication) and interact intelligently with a smart card reader. Smart card technology conforms to international standards and is available in a variety of form factors, including plastic cards, key fobs, watches, subscriber identification modules used in GSM mobile phones, and USB-based tokens.

A smart card is a plastic card about the size of a credit card, with an embedded microchip that can be loaded with data, used for telephone calling, electronic cash payments, and other applications, and then periodically refreshed for additional use. Currently or soon, you may be able to use a smart card

A smart card contains more information than a magnetic stripe card and it can be programmed for different applications. Some cards can contain programming and data to support multiple applications and some can be updated to add new applications after they are issued. Smart cards can be designed to be inserted into a slot and read by a special reader or to be read at a distance, such as at a toll booth.

Outgoing data originate from the LRI2K load variation using Manchester coding with one or two subcarrier frequencies at 423 kHz and 484 kHz. Data are transferred in the LRI2K at 6.6 Kbit/s in low data rate mode and 26 Kbit/s fast data rate mode. The LRI2K supports 53 Kbit/s in high data rate mode with one subcarrier frequency at 423 kHz.

http://www.nfcandrfid.com/products_info/LRI2K-2K-memory-ISO15693-smart-card-319948.html

What are RFID silicone wristband?

13.56 MHz & 125 KHz RFID wristbands and legic in a variety of styles and colors for small to medium range RFID applications. RFID Re-usable wristband is a good solution for the RFID access control and access control and especially suitable for the amusement park.

About RFID silicone wristband

RFID silicone wristband feature:
-125KHZ chips: Hitag 1, Hitag S, EM4102, EM4200, EM4550, T5577 ect.
-13.56Mhz chips: I-CODE SLI ,MIFARE 1k, MIFARE 4k, Mifare ultralight ect.
-UHF: NXP G2IL, G2XL,G2XM , IMPINJ M3, M4, ALIEN Higgs 3 ect.

Printing Option
Silk-Screen Printing LOGO
Laser number and LOGO

Application
Access and Access Control
Ticketing
Expenditure and Park Access
Membership Management and Loyalty

N&R technologies company main products line are including RFID cards, plastic cards, NFC business cards, RFID tags, NFC sticker, RFID inlay, RFID key fob, wristband , reader ect.

http://www.nfcandrfid.com/products_info/RFID-silicone-wristband-319931.html

Using the card reader function?

These days the memory cards are coming in such small sizes which you can ever imagine. The Magnetic card reader has come up with such small Magnetic card reader USB Magnetic card reader that when we first looked at it we couldn’t believe our eyes that it was a card reader. You can simply plug your card reader into the USB slot directly and you are ready to go. It only weighs 2 grams and is able to read both the regular and memory cards. This impromptu USB flash drive also has the hot-swapping capability introduced which enables you to use this for portable data transfer without missing on anything. The most exciting part is that, you can leave this device plugged in permanently into the USB port on the notebook or the laptop without worrying about it snapping off like any other USB memory card readers.

This device is hand swipe operated magnetic card reading machine with USB interface. They comply with ISO-7811, 7812 magnetic card decoding standard completely. It could read card bi-directionally, has intelligent lights to alert if card information is read correctly. Exquisite magnetic installation structure makes card reading more stable and reliable, that is our patented technology. Reasonable product design makes products small, and compact. It's only-read function.

http://www.nfcandrfid.com/products_info/Magnetic-card-reader-319920.html