2016年4月29日星期五

You can usually tell which Mifare 1k card compatible

N&R supplies Mifare 1k card compatible which is 100% full compatible with original NXP mifare s50 card. And it is with the same functions but cheap price .It is a good ideal for you to chose the mifare 1k card compatible.
We use the most steady and promised good quality China Fudan FM11RF08(F08) compatible chip.

Many PCs rely on so-called ‘integrated’ graphics which is either a chip on the motherboard or one built into the CPU itself. Other PCs have a ‘dedicated’ graphics card, which plugs into an expansion slot on the motherboard.

You can usually tell which type your PC uses by the location of the port you use to connect your monitor. If it’s in among the other ports, such as USB and Ethernet, then it’s integrated graphics. If the port is separate to the others, and there’s more than one port, such as a pair of DVI outputs, HDMI or DisplayPort, it’s probably a dedicated graphics card.
Whichever type it is, you’ll need both an expansion slot – called PCI Express – and a corresponding slot in the case – with a removable backplate where the connections will sit in order to fit a dedicated graphics card.

On many PCs, there will be a few expansion slots on the motherboard. Typically they will all be PCI Express, but for a graphics card you need a PCI Express x16 slot. There are three versions of this slot, but they’re backwards compatible, so a modern PCI Express 3.0 graphics card will work in a motherboard with a PCI Express x16 2.0 slot.
This motherboard has two PCI Express x16 slots. It's most common to use the upper-most one for a graphics card, but if you're fitting two cards in an nVidia SLI or AMD Crossfire setup, you'll need both. Check which standard your motherboard supports before investing in a pair of cards, though.

FM11RF08 could be the contactless card IC based on ISO14443 Type A that 100% Compatible Mifare 1K Chip. This revolutionary product has 1K x 8bits EEPROM organization. The absolute maximum communication cover anything from the reader antenna and contactless card is approximately 10 cm. FM11RF08 boasts an incredibly high security performance using the encryption and communication circuit, which is a genuine multi-application smart card with all the functionality of an processor card realized with hardware logic. So FM11RF08 may be especially tailored to meet the criteria of an payment card which can be used for ticketing systems in public places transport and comparable applications.

2016年4月27日星期三

The Golf Tag uses a three locking ball system

Golf Hard tag is a great visual deterrent. The Golf Tag uses a three locking ball system to security the pin and requires a Golf magnetic detacher to remove the pin. The RF round Tag has the added security of enclosing some of the clothing inside the pin, similar to the cone pin. By locking some of the cloth in the tag a shoplifter is forced to cut the entire tag out, leaving a hole in whatever they had tried to steal. Standard magnetic detachers will not work with the golf tag making it even more difficult for shoplifters to defeat.

Golf hard tag is a great EAS tag with 3 balls clutch. It is made of ABS material, hard but not brittle, lasting not fade, chrome plated, chemical resistance.
Mainly used as clothing security tags, anti theft tags, store security tags. Radio control, you need to install access control systems with installation.
Golf Hard tag is a good visual deterrent. The Golf Tag uses a three locking ball system to security the pin and needs a Golf magnetic detacher to eliminate the pin. The RF round Tag gets the added security of enclosing some of the clothing within the pin, just like the cone pin. By locking many of the cloth from the tag a shoplifter is forced to chop the entire tag out, leaving a hole in anything they had tried to steal. Standard magnetic detachers will not help the golf tag rendering it even more difficult for shoplifters to defeat.
Golf RF hard security tags are appropriate for all Checkpoint and similar 8.2 MHz Rf (RF) anti-theft systems. Bought from degrees of 1,000 (includes pin).

Golf RF hard security tags are compatible with all Checkpoint and similar 8.2 MHz Radio Frequency (RF) anti-theft systems. Sold in quantities

The RFID tag in a smart label. It comprises the chip and aluminum

RFID inlays are produced using advanced flip-chip technology whilst-of-the-art, high-volume die-bonding processes with integrated inline quality and process control to ensure superior quality and optimal performance. These transponders come in a variety of shapes with some other antenna designs and materials to meet customer requirements. For individual projects where N&R's existing inlay designs usually are not directly applicable, our company offers customized purpose-built, high-performance inlays to handle specific customer and application needs to get to know today's and future market demands.
Dry (chip antenna epoxy glue [PET] film) or wet (with adhesive backing) inlays can be directly embedded into third-party products or changed into finished products in a number of applications, including, and not limited

The RFID tag in a smart label. It comprises the chip and aluminum, copper or silver antenna bonded to a polyethylene terephthalate (PET) layer that is delivered to the label maker "dry" (without adhesive) or "wet" (attached to a pressure sensitive liner). The inlay is adhered to the back side of the label and printed and encoded in an RFID printer. See RFID tag, RFID reader, RFID printer and RFID.

RFID antenna design that enables end-users to reach and sustain consistently high levels of performance in all UHF frequency regions globally with the same inlays. This represents critical competitive and logistical advantages for any fast-moving consumer goods company with manufacturing, distribution and customers located in different parts of the world. The same RFID inlays can be used by the manufacturer, the logistics service provider and the retailer, to track and identify products accurately and cost-efficiently throughout the supply chain at item level.

2016年4月26日星期二

Coin token


The Coin token is ABS material which water proof and dust proof. It is design for patrol system, warehouse management, tracking asset or goods. It can be also as mass transportation ticketing.

The coin token can be with hole or without hole. You can install the hole coin token on the pallet, the cartons, the machine and so on. If you don’t need the holes coin tags. You can do strong adhesive on one side of coin tag. With strong tag it is much easier to use for asset tracking or goods tracking applications.


2016年4月24日星期日

Production of Recombinant Proteins Gst L1, E6 and E7 Tag Hpv 16 to be Used in Luminex Assay for Antibody Detection Among Tunisian Female Population Wi

The mini tag protects: clothes, hats, and also other accessories. Mini square make a great visual theft deterrent. This security tag is a wonderful lightweight visual theft deterrent. Mini Hard Tags work with a Flat Head, Cone, or Ink pin to secure sensor to merchandise. The Mini Hard Security Tag works extremely well with a loop lanyard with pin, or pin lanyard to defend shoes, bags, plus some sports gear. This outlet security tag requires a standard magnetic detacher to obtain the pin.

a- Laboratory of Environmental Immuno-Microbiology and cancerogenesis (IMEC Unit) Faculty of Sciences Bizerta 7021 Zarzouna Tunisia.
b- Service of Radiotherapy Institute of Cancer Salah Azeiz Tunisia.
c- Service of Gynecology- obstetrics Center of Maternity and Neonatalogy Hospital La Rabta Tunisia.
Certain types of Human Papillomavirus (HPVs), mainly HPV types 16 and 18 have been recognised as major etiological factors for the development of cervical cancer. Antibodies against HPV antigens have been found to be associated with cervical cancer evolution. Different assays can be used for antibody detection but they have low levels of sensitivity and specificity. In the present work we are interested to prepare recombinant proteins to be used in LUMINEX technology in order to undergo serological study in Tunisian female population. So, HPV types 16 L1, E6 and E7 sequences fused to their 3'-end to a sequence encoding the terminal undecapeptide of the SV40 large T-antigen (tag) were isolated from plasmids and inserted into a pGEX vector for expression as GST fusion proteins in E.coli. Coding sequences for L1tag, E6tag and E7tag of HPV 16 respectively were mobilized by digestion with enzymes and ligated into digested plasmids downstream of the GST domain. An expression plasmid for GST tag was constructed by inserting a fragment coding for the tag epitope. Cells of E.coli BL 21 were transformed with the pGEX plasmids and grown in Luria Bertani medium containing the ampicillin. Recombinant proteins expression was induced by adding 0.25 mM isopropyl-?-D-thio-galactoside (IPTG) to the medium. The bacteria were harvested after induction and pelleted bacteria were resuspended in phosphate buffered saline (PBS) and lysed using a high- pressure homogenizer. Lysates were then cleared by centrifugation.
Proteins were verified by migration in sodium dodecyl sulphate (SDS) gel electrophoresis. Data showed that they were stable for detection and these lysates have been conserved at -20°C to be used in Luminex for detection of antibodies in female Tunisian population. This assay showed that the sero- positivity toward the different antigens differs upon the group studied and differences between cases and controls were significant (P<0.001). In addition, elevated percentage of positivity was found for E7 (61 %) versus 44 % and only 21 % for E6 and L1 antigens respectively and the intensity of the antibody response toward the late antigen L1 and the early antigens E6 and E7 were different.

On a global level, human papillomavirus (HPV) is estimated to cause almost half a million cases and more than 270,000 deaths from cervical cancer, corresponding to more than 2.5 million years of life lost (YLL) annually (Sue et al., 2007).
HPV type 16 (and to a lesser degree HPV type 18) is linked with more rare cancers, namely cancer of the vulva, vagina, penis, anus, oropharynx and larynx. Effective prophylactic vaccines have been developed (Dillner et al., 2007). Molecular epidemiological studies have demonstrated that specific subtypes of HPV are associated with cervical cancer (Castle and Giuliano, 2003; Dillner and Brown, 2004).
The HPV group of viruses today consists of more than 100 completely characterized types. Partial sequences of additional isolates indicate that at least another 100 HPVs exist. Of these, 15 genital HPVs are established as oncogenic in humans. HPV type 16 is by far the most important virus, accounting for more than 50% of all cervical cancers. HPV16 is even more dominating as an etiology of the noncervical HPV-associated cancers (Dillner, 2005). HPV serology is complex for several reasons. Different types of HPV can infect the epithelia of skin or mucosa and induce proliferative diseases. HPV antibodies are type specific. Those targeting the major viral capsid protein L1 are markers of infection, and those targeting the viral oncoproteins E6 and E7 are markers for HPV-associated cancer (Waterboer et al., 2005). Conventional serologic methods such as ELISA allow the analysis of sera for antibodies to only 1 antigen per well. Previous studies have determined antibodies against early antigens as E6 protein by ELISA methods that use small, linear epitopes of the proteins but sometimes they show low sensitivities and specificities. To improve the immunologic method, other approaches have been advanced like radioimmunoprecipitation assays (RIPAs) with whole native proteins and sandwich ELISAs with full-length (Meschede et al., 1998). Today, HPV serology is performed mostly in a limited number of laboratories, but it is likely to become widely used in clinical laboratories in the post-HPV vaccination sera. Previous studies showed that the LUMINEX method constitutes an attractive method for HPV serology in high-throughput laboratories (Waterboer et al., 2006).
In the present report, viral antigens were expressed with pGEX vectors in Escherichia coli as double fusion proteins with N-terminal GST and a C-terminal peptide (tag) consisting of the 11 C-terminal amino acids from the large T antigen of simian virus 40. The protein concentrations of the cleared lysates have been determined using the Bradford-reagent and the characterization of the full-length recombinant proteins was verified by coomassie-stained SDS-PAGE. Furthermore, the titration of antigen lysates was done using mouse anti-tag antibodies. These antigens were then used in LUMINEX assay for antibody detection in Tunisian female population.
A modified pGEX vector was constructed for expression of GST fusion protein with an additional C-terminal fusion tag in E.coli. HPV 16 L1 coding sequence lacking the 10 N-terminal residues was amplified by polymerase chain reaction PCR with SmaI/SalI ends and inserted into pGEX4T3tag opened by EcoRI digestion.
E.coli BL21 cells transformed with the pGEX plasmids were grown at room temperature in Luria Bertani medium containing 1mM ampicillin; At an OD600 of 0.3 recombinant protein expression was induced by adding 0.25 mM isopropyl-?-D-thio-galactoside (IPTG) to the medium. The bacteria were harvested by centrifugation 15 h after induction. Pelleted bacteria were resuspended in 40 mM Tris pH 8, 200 mM NaCl, 1 mM EDTA (ethylenediaminetetraaceticacid) and 2 mM DTT (dithiothreitol) supplemented with complete protease inhibitor cocktail and lysed using a high pressure homogenizer. ATP (adenosine triphosphate) and MgCl2 were added to final concentration of 2 mM and 5 mM respectively (Sehr et al., 2001).
HPV 16 E6 and E7

HPV type 16 E6 and 16 E7 coding sequence fused at its 3'-end in frame to a sequence encoding the terminal undecapeptide of the SV40 large T-antigen (tag) is isolated from bluescript plasmid and inserted into a pGEX vector for expression as GST fusion protein in E.coli. These coding sequences for E6tag and E7tag were mobilized by digestion and ligated into digested plasmid downstream of the GST domain.
Then, E.coli BL 21 cells transformed with the pGEX plasmids were grown and induction protein expression was induced as previously described for L1. The bacteria were harvested 6h after induction by centrifugation. Pelleted bacteria were resuspended in PBS containing 2 mM DTT, 1% Triton X-100, and complete protease inhibitor cocktail and lysed with the high-pressure homogenizer. Lysates were then cleared by centrifugation and stored in aliquots at -20°C (Sehr et al., 2002).
EAS (Electronic Article Surveillance), also known as Electronic Article Surveillance (Pirates) system is one of the major commodity security measures currently widely used in the retail industry. EAS in the mid-1960s in the United States come, first applied to the garment industry, has now been extended to more than 80 countries and regions worldwide, applications are extended to department stores, supermarkets, book a variety of industries, especially the mini tag application of large supermarkets (storage) of fully developed.
EAS tag

2016年4月20日星期三

The RFID inlay is made up of two components

The dry inlay is typically supplied on a substrate or coating with adhesive, it is called a wet inlay.

RFID wet/dry inlay , working with is the largest smart tag(RFID tag and EAS tag) manufacturer Ubique Tag in China, with a space of 30,000㎡ and investment over than 35 million USD, the company has one top-class office building and nine big-scale production buildings. RealSmart is dedicated to provide low cost and high quality smart tag products on a massive basis to global industries.

With abundant experience in RF industry and powerful designing capability. UBIQUE TAG is not only capalbe of offering almost 200 designs of standard HF and UHF antennas,but also capable of completing a customized antenna design and sample production within 4 hours after clients make the initial customized requirements.

RFID inlay -- which is often no more than a grain of rice -- could be the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses rf waves to relay information with a laptop or computer by using an RFID reader.

Types
RFID inlays are called "wet" or "dry." RFID inlays are viewed "wet" if an adhesive is applied towards the inlay to stick it into a pressure-sensitive liner that comprises the label. Inlays are believed "dry" if the inlay is coupled to the label without using an adhesive.

Components
The RFID inlay is made up of two components. An internal circuit or microchip that stores personal identifying information attaches with a small coil of aluminum, copper or silver wires referred to as antenna, which transmits and receives radio frequency signals. The microchip and antenna are then added to a label, along with the entire unit is encased in plastic.

The Ins And Outs
Data from your microchip passes to the RFID tag's antenna, where it really is read through the antenna associated with an RFID reader and passed onto a number pc for archival purposes, processing or analysis.

2016年4月19日星期二

RFID Key Fobs - Durable

Durable RFID Key Fobs are the ideal identification solution for personnel applications where the tag can be secured to a key chain, etc. Works great in conjunction with our other Access Control products, i.e. RFID Windshield Tags or RFID Lanyard Badges, for a complete Access Control solution. These tags perform even better than they look. Made from a variety of durable, permanent materials, the actual construction of the tag protects the tag by sealing it within the layers of durable material. In addition, each tag can be programmed to match the variable information printed on the label.

The RFID keyfob which is small and nice performance and it is durable. It is easy to take in your pocket as RFID keyring. You can design your own logo and numbers on the RFID keyfob. It is water proof , dustproof and durable.
We supply 125KHz and 13.56MHz chips for them. Typically chips such as TK4100, T5577,EM4200, MIFARE 1K, MIFARE 4K, ICODE2 ect.
Now you can use the RFID keyfob as different kinds of RFID applications including door access control, parking, time and attendance.

We supply many kinds different design key fobs, such as ABS key fob, leather key fob, epoxy key fob, metal key fob. Welcome enquiry us , response you in 24hrs.

Functions And Features Of Memory Card Reader


A memory card reader is a device that can read flash memory cards and transfer the data to the computer. It is connect to the USB port on a computer. It has a very wide varieties and types available in the market where users can have a removable access for any kind of digital equipments. For example, Digital cameras, mobile phones, MP3 players etc. It comes in various format and size of handing data. There is single memory card reader as well as multiple memory card readers available in market. The latest memory card readers can read and support with variety of memory card formats.
The biggest advantage of a memory card reader is that the memory cards can be read directly on the computer. There is no need to attach any extra device on machine. It also saves batteries and wear-and-tear on the camcorder or other digital device. Many users are own more than one device which support flash memory cards, with each device using a different type of card. Multiple memory card reader supports variety of formats which is useful for all memory cards users prefer to use. Number of latest computers and laptop machine has a memory card reader built-in as default. Printers and even some monitors also have a memory card reader built-in now.
Depending on the operating system, users have to install a driver for the card. For some of the operating systems there is no need of drivers to install. The driver comes with the card reader or it can be downloaded from the manufacturer's website. Some of memory card readers support quick image transfer to a computer than it's using a digital camera.
This device is hand swipe operated magnetic card reading machine with USB interface. They comply with ISO-7811, 7812 magnetic card decoding standard completely. It could read card bi-directionally, has intelligent lights to alert if card information is read correctly. Exquisite magnetic installation structure makes card reading more stable and reliable, that is our patented technology. Reasonable product design makes products small, and compact. It's only-read function.

2016年4月17日星期日

RFID pallet tag

RFID pallet tag with high temperature industrial ABS plastic / metal shielding materials / epoxy potting, and ultrasonic welding, quality and good performance, suitable for use in large-scale outdoor power equipment inspection, a large tower wire pole inspection, medium-sized elevator inspection, tray management, large pressure vessels, liquefaction cylinder gas bottles, factory equipment management, line inspections, quality control metal bridges, tunnels inspections, machine identification, vehicle license plate, metal container management, power household equipment and other aspects of product tracking.
Mark White, our pallet expert, argued that pallets and RFID make sense for tracking product within the four walls of a facility or across a closed loop supply chain—that is a supply chain that is controlled by a manufacturer—but not for tracking cartons across an open loop supply chain, with a number of unrelated players, like the retail supply chain. What’s more, he offered, attaching an RFID tag to a wooden pallet is a recipe for disaster, given how pallets are often handled. “One of my colleagues once said that putting an RFID tag on a pallet is like putting a license plate on a car in a demotion derby,” White said. “There are probably better ways to track a carton than to put an antenna on a pallet that is subject to damage pretty easily. It makes more sense to track the carton.”

Manufacturers are the most likely end users, and Green Line Armor has targeted the canned goods industry, manufacturers of heavy equipment and products and the automotive industry. The company’s biggest customer has 2,000 pallets that are used to handle work-in-process in its factories and then to store finished goods in the warehouse.

From the start, Green Line Armor designed a compartment in the plastic lead boards to hold an RFID tag. It then installs a passive RFID tag on the lead boards on both sides of the pallet. That way it gets a solid read no matter how the pallet is oriented. The tag has a 12-digit identification number that identifies the pallet when connected to a database on the back end. Green Line Armor uses that information for warranty purposes.
Pallet tags come in a wide variety of shapes and sizes depending on what you are attaching the tag to and what kind of read range you want. We can provide you with the label size and inlay under the label for whatever you need to tag.
Some inlays are more sensitive to reader orientation so you need to make sure that whatever labels you order are geared for your environment.  Just because your neighbor's company uses a Rafsec Short Dipole on his pallets does not mean that you should!

We supply label stock in rolls with embedded inlays for almost all Gen2 inlays that are designed for label applications and almost every 13.56 MHz High Frequency label application.
It is very important to track your pallets and identify valuable asset goods in the course of global commerce today. To help maintain the whereabouts of important assets that is fueling its growth which it is ability of RFID asset tracking. We can offer HF and UHF RFID pallet tags for your different required projects. Specifically UHF passive tags if very perfect match for asset management and tracking and the return on investment for implementing an RFID infrastructure is very high.
RFID pallet tag which can be used on metal surface ( which can anti-metal RFID tags) and we also produce the tags on non-metal surface to tracking and management asset.

2016年4月15日星期五

The RFID library label is designed

The RFID library label is designed for specific for library management system. Using the latest RFID technology, it is much faster to read the information than traditional barcodes.

Development of RFID technology, making extremely thin small chip that can be embedded in RFID library label, library tag is very easily fixed on the book, with the development of library information systems, to create a digital, automated library provides a very good opportunities.

The Features of RFID book tag

1.
High-quality and high-capacity data storage space chip can store information on the inside of each book, the data can not require line of sight without direct contact, read and write in a range of 0.05 m to 1.2 m.


2.
Front-end systems and system software have good learn ability and operability. Especially operability (ease), so with the primary computer operating level management personnel, through a simple study can master the system operating essentials, to be able to complete the task on duty operating level.

3.
The RFID library label stable and reliable, can be used for more than 10 years, temperature, light, it does not affect the use, even if the RFID library label is dirty, worn surface nor will it affect use.

2016年4月14日星期四

What data is stored on a payment card's magnetic stripe?

A magnetic card is a rectangular object that contains sometimes a magnetic strip on the outside or even a magnetic object inside card which contains data. A magnetic card may contain information about somebody such as available credit or pass codes for entering secure buildings. The image is one particular Magnetic card being swiped through a magnetic card reader.
A magnetic stripe card is a type of card capable of storing data by modifying the magnetism of tiny iron-based magnetic particles on a band of magnetic material on the card. The magnetic stripe, sometimes called swipe card or magstripe, is read by swiping past a magnetic reading head. Magnetic stripe cards are commonly used in credit cards, identity cards, and transportation tickets. They may also contain an RFID tag, a transponder device and/or a microchip mostly used for business premises access control or electronic payment.

Magnetic recording on steel tape and wire was invented during World War II for recording audio. In the 1950s, magnetic recording of digital computer data on plastic tape coated with iron oxide was invented. In 1960 IBM used the magnetic tape idea to develop a reliable way of securing magnetic stripes to plastic cards,[1] under a contract with the US government for a security system. A number of International Organization for Standardization standards, ISO/IEC 7810, ISO/IEC 7811, ISO/IEC 7812, ISO/IEC 7813, ISO 8583, and ISO/IEC 4909, now define the physical properties of the card, including size, flexibility, location of the magstripe, magnetic characteristics, and data formats. They also provide the standards for financial cards, including the allocation of card number ranges to different card issuing institutions.
Magnetic stripes on payment cards--sometimes called "magstripes" for short--are divided into three tracks of data which are encoded directly to the magstripe. Only Track 1 and Track 2 are actively used in payment card processing. Track 3 is rarely used and may not always be present on a card.

A magnetic card is a type of card capable of storing data by modifying the magnetism of tiny iron-based magnetic particles on a range of magnetic material for the card. The magnetic stripe, sometimes called swipe card or magstripe, is read by swiping past a magnetic reading head. Magnetic stripe cards are commonly found in credit cards, identity cards, and transportation tickets. They could also contain an RFID tag, a transponder tool andAndor perhaps a microchip mostly used for business premises access control or electronic payment.

Both Track 1 and Track 2 contain enough basic information for processing payment card swipes. Most card readers will be able to read both Track 1 and Track 2 data, in magnetic card case one of the tracks has become unreadable.

2016年4月13日星期三

RFID Epoxy Tag

RFID epoxy tag transponders are constructed for optimal performance under harsh conditions. They are resistant to fuels, mineral oils, petroleum and salt mist. They repel moisture – even in high temperature, high pressure washes.

Unrelenting performance despite temperature fluctuations allows Epoxy Tag transponders to adapt to demanding applications. These tags can tolerate repeated autoclaving in medical applications, and plastic injection molding processes for permanent embedding into industrial components, equipment or containers.

Each micro thin Epoxy Tag device has a smooth surface, which may be imprinted with customized visual codes or artwork.

The Epoxy Tag Keyfob features a unique chip that optimizes NFC program security, utility, and ease-of-implementation when deployed with HID Trusted Tag® Services, a cloud-based authentication platform that adds a non-replicable identity to each interaction.
RFID epoxy tag is very new design for customers. It is with beautiful performance and multi-function. RFID epoxy tag sometimes we call RFID Jelly tag which are water proof and dust proof. It is easy to carrying as RFID key fob and nice looking will attract customers’ eyes.
RFID epoxy tag is wildly used in NFC payment, E-ticket, access control, loyalty program ect.

N&R technology supplies 125khz and 13.56MHz popular chips of RFID epoxy tag. Such as, EM4200, EM4305, TK4100, T5577 ect. And MIFARE S520/S70/Ultralight/DESFire EV1 , NTAG203/213/215/216 and so on.

2016年4月12日星期二

What is Round Clothing security tag

We buy all types of used retail Round clothing security tag and equipment. Call for a value on your used EAS equipment. When the store is slow watch your employees. Free time is often filled with pilferage plotting. Keep those hands busy applying security tags and taking inventory. We offer retail security products and loss prevention information. Learn about electronic article surveillance at used newsletter.

Learn about used EAS or Electronic article surveillance equipment info and tips at our retail security tags . Winter jackets are often used as shoplifting tools so be prepared. Loaded with information about used Round clothing security tag and checkpoint tags Prevention, Shoplifting, and myriad other topics. Our loss prevention tag pro's have plenty to say about refurbished retail security equipment.

Track retail security tag and electronic article surveillance packages at Security towers for a retail store are shipped in specially sized boxes. This is true for both Sensormatic and Checkpoint Systems manufactured retail security tag detection systems.
magnetic and power detacher mechanisms are easily found in the detacher section. reserves the right to sell the tag remover for all retail security detection eas tags including knogo, Alpha, Sensormatic, and Checkpoint Systems to anti theft security tags loss prevention users only. Do not attempt to purchase any item from Harry G security for unintended use. Harry G Security is Retail Security Ethics Compliant. The tag remover for hard tag sensor ink or supertag is included. Shoplifters be wary, we will not ship to non retailers. Retail detacher sales for electronic article surveillance tags independent of security tags are welcome. Alpha security tag detacher keys are also available to retailers only. Proper Sensormatic deactivator use is important. Shoplifting related inventory shrinkage super tag surveillance equipment systems and anti theft shoplifting checkpoint security systems are stocked.

Round clothing security tag which is wildly used for clothing, towel , bath towel shop security. Now there are many retail stores are using clothing security tags. It is application for checkpoint systems and all 8.2MHz systems. The round tag is also known as the Mini tag or Mini square. It is uses a three locking ball System to secure the pin. This security tag with cheap price and it can be recycle used. It is very good ideal as anti-shop clothing security tag.

2016年4月11日星期一

Wristbands: Beneficial in more ways than one!


As of today, everyone chooses to wear a wristband with a purpose of making a style statement. Many fashionable people make sure that their wristband is more than a style accessory. Though some sport it as a fashionable and stylish accessory, some use it to create & spread social awareness. Sporting these bands as a style quotient had begun to gradually lose its charm and was becoming an outdated concept. But now it has come back in style. Several agencies have composed many different uses for these bands. Some of the latest developments include negative ions & energy bands. These bands create negative ions necessary to balance the effect of positive ions in your body. This enhances your health and strengthens your healing.

The horizon of the wristband market is vast, since it can be worn by everyone, male and female, children and adults. Many organizations use this feature to their advantage and effectively advertise themselves through wristbands. This is obvious during the promotion of political campaigns where camps embed their party logos or taglines. This has become a heavily used strategy during elections. More often or not, you will find these wristbands having logo imprints of the park sponsors. Nightclubs, stadiums and hospitals are other such places utilizing wristbands as more than a simple style accessory.

The use of wristbands for health, particularly, struck a chord with the masses in the mid 2000's. The Live Strong bands were one of the first brands to bind health with fashion and achieved popularity. Due to its trendy and colorful appearance, it managed to successfully inform people of some of the widespread diseases and yet, hold its popularity amongst the youth. The energy wristband is a similar enterprise which improves the health of its wearers. Silicone and rubber are normally the key ingredients in the making of these accessories. These energy bands are used to rejuvenate the body and help individuals recoup.
The energy wristbands, especially bands having negative ions, boost your wellbeing and power levels. It accomplishes this by extracting the negative ions, from the minerals tourmaline and volcanic, and imparting the same into durable silicone rubber. This in turn manifests negative ions. The transformation balances the affect of positive ions within the body. Besides the health factor, these energized wristbands also come in various colors and themes. This adds to the style of the wearer. Wearing this wristband will certainly help you stand out in any fashionable company. This technology has been tested and proved to be very effective. There are many people who confirm that their stress levels from everyday life have reduced considerably with the use of these wristbands. The use of the ionized wristbands is also known to improve sleep and relaxation. These wristbands are easily available on the internet within an affordable price range. The ability to survive intense wear and tear makes them extremely durable. Search for your wristbands, based on your needs and experience the benefits yourself.

2016年4月8日星期五

ISO15693 ICODE2 RFID coil

N&R is a leading supplier of smart cards and RFDI coil for global system integrators and distributors. We offer a wide range of RFID tags with contact chip or contactless chip (LF, HF, UHF) ,such as ISO CR80 card, wristband, key fob, disc tag, laundry tag, tire tag ect. They are widely applied in different kinds of applications. For examples: access control, smart payment, loyalty system, assets tracking, identifications, time and attendance management.
Basically I am motivated to replace the antenna on this RFID reader. The reader is really cheap, and fits my porpoise, its recognized as a USB keyboard.

My Idea is to build a new antenna that can be fitted into a PVC tube and have a usb "reading rod". Basically I want to make a new coil with copper cable which area is a rectangle instead of a square.

Hackaday has provided me with some information about this, but nothing useful about antenna modding.

Thanks a friend (Chris) I manage to get some technical documents about this matter, some turned to be really useful and cover basic subject (like Magnetism, Faraday's Law, Mutual induction) it really help me understand more about RFID, it sure brought me memories when I was in college, but could not find any decisive information on how to shape a new antenna.

I know antenna shapes and geometry are dependent on: Frequency (125 Khz in this case) and range of reading (of the tags) and number of turns. Of course many other items, but they are purely derivative from the two I mentioned first.
Priority 1 Design carry a stock of these RFID coil antennas. Our RFID coil antennas have been designed by us
specifically for our RFID readers and transponders but can easily be used by hobbyists and professionals to
create their own RFID designs.
This coil was designed to give our rfid readers longer read range.
Typical read distances based on our example circuit are 8cm for keytags
and 10cm for rfid cards.
A 10cm coil allows for a larger field pattern and slightly larger read ranges over our 49mm antennas. especially when larger tags are being read.
This coil was created for our RFIDLOG series of rfid data loggers. Its large 16cm diameter allows for greater read range than a smaller antenna will allow.
Its also suitable for use with our RFIDRW-E series of readers with only
a slight addition to the tuning capacitor.
coil allows for a larger field pattern and longer read ranges. When connected to out RFIDRW-E-232E enhanced reader this antenna allows typical read ranges of 27cm for a 32mm FDXB disc tag.
RFID coil anntena coil, the actual read range for  reader is about 4cm. I plan to remove the original anntena coil and replace with another anntena coil to improve the reading range. so, what type of material i needed to build the antenna coil? for example copper? is that correct? how many turn for the anntena coil? how many diameter for the anntena coil


2016年4月7日星期四

Choosing the Best NFC card for Your Needs


Choosing the right NFC card can be a tough job especially given the vast array of choices available in the market. There are a lot of people who are drawn by the prices and choose the cheapest NFC card. However, the truth is that these cards turn out to be the most expensive ones to use. Fortunately, all you have to do in order to make the best choice in picking a NFC card is to follow these three basic steps:

1. Identify what you need. You will be faced with a lot of choices for international NFC card. The first step in choosing the right one for you is determining what exactly you need. When identifying your needs, consider where you will be calling from, how long your calls will be, how many calls you will make, whether you want your connection to have high quality, and what purpose it will serve (is it personal or for business?).

2. Understand your options. Before you purchase any of the NFC card you see in different advertisements, look very closely at their details.

A lot of companies that make NFC card expertly hide little fees out of your sight. Some companies name these fees as maintenance fees, connection fees, disconnection fees, or termination fees. Cards that have very low rates are often the ones that have the most amounts of hidden charges.

However, some of the fees you will pay are not necessarily bad since they may depend on your needs as well. For instance, if you are only going to use a calling card once, there really is no need for you to fuss around with any extra fees since you will not be using it that much anyway. Rather, focus on the rate of the card.
In addition, you should also look for access numbers that the international phone cards may provide. If you are planning to make calls while you are travelling, you need to ensure that the card you have has access numbers in the country where you are going to travel. You should also check if the access numbers are local or if they are toll free numbers. Western countries such as the United States offer toll free access numbers, which can cost more than local access numbers.

If you are going to buy a NFC card to keep in touch with your business, your choice of cards that offer business specific features is vast. Some of these features include a call back, speed dial, international access numbers, and no associated fees.

3. Choosing the NFC card. Search the Internet for the right NFC card that suits your needs and demands. Try to avoid branded ones since they tend to cost more and charge additional fees. This is due to the fact that you are also paying for the name of the brand. Small carriers that sell calling cards provide better alternatives, whereas large corporations spend a lot of money which they take back by increasing the price of their services.

2016年4月6日星期三

What is smart card reader


Smart card reader is an electronic drive for reading and writing smart cards such as IC card, RFID card, etc. There are two types: contact smart card and contactless smart card. Know more what is a smart card reader below.

contactless smart card reader is the dedicated reader for the easy-to-use M1 card, it can read and write Mifare S50, S70 card with using the D8 core technology, connect with a PC and related equipment via RS232 serial or USB port, (USB hassel technology adoption). With more simple, stable and low cost, contactless smart card reader supplied various platforms Driver Development Kit, with full functionality demo program operable radio card and test card with automatic operation. D3 type smart card reader is the development of IC card related products and systems integration necessary front-end processing equipment, its rich, perfect interface functions that can be easily applied to industry and commerce, telecommunications, postal services, taxation, banking, insurance, medical, meeting attendance, various deductions cafe management, gas stations, parking management, etc. (such as parking fees charged) charges, stored value, query and other smart card management application systems.
Smart card reader instruction manual:
First, need to focus on the frequency range of the reading and writing device to the frequency of use to see the project meets its specification;
Second, to understand the reader's maximum transmit power and antenna matching selection whether excessive radiation;
Third, check the available number of antenna ports of reader, depending on the application to see if need multi-interface reader;
Fourthly, communication interface meets the needs of the project;
Fifth, the interpretation of distance and anti-collision indicators, reading from the index must be clear what the antenna and tag testing; anti-collision to be clear what label for how long and under what arrangement over the entire reading;
Sixth, in addition to an RFID application system and reader related, but also and tags, antennas, the material is tagged item is tagged item movement speed, ambient and other related before determining the best equipment can simulate site conditions testing and validation to ensure that the product really can meet the application requirements;
Seventh, in the case of continuous simulation test stability of the equipment, to ensure long-term stability work.
Fast, accurate positioning: check on your mobile device stores a geographical distribution throughout the CRDA, will make geopositioning indication of the investigation files, to achieve quickly find and archive operations.
Easy inventory: inspection device using RFID can quickly complete inventory files, troubleshooting, shelves, etc., in greatly reducing the workload while librarians can improve records management efficiency, reduce error rates when lending archived.
File information accurate records: archives while handling people, people to borrow, lend, archiving and time are automatically registered to complete, to prevent manual errors to ensure the accuracy of the raw data archive management information systems, and provide real-time query file status, report printing.
Batch File lending, archive registration and management: records management is a very complicated job, fewer records management staff, people seeking to borrow more archives, records management application of RFID technology to achieve modernization, automation, increase productivity and reduce labor archivist strength, help librarians to automate batch file loan, filing registration
Archive RFID tags store information that has changed freely: access electronic tag data capacity, and stores information about the changes with ease, facilitate file property information management.
Security: After the records management staff to verify the landing records management system through RFID identity before they can lend to archives, archiving operations, for the illegal take-file, the system will alarm. Tag information is also encrypted.
Smart card reader read card is divided into contact and contactless. Contactless smart card reader as long as a valid card reader reading distance within the range of tasks to complete the card reader, the example is Syncotek SK-600P smart card reader, contact smart card reader (such as Syncotek Sk-285P) needs the contact with card and reader to complete the task, but it is divided into several reader modes, for example

2016年4月4日星期一

HF RFID inlay

HF RFID inlay technologies announced today their UHF and NFC multi-frequency DualWing™ family of inlays. The DualWing series is the first tag to seamlessly combine the benefits of UHF’s global supply chain acceptance with the consumer engagement capabilities of NFC into a single tag design. The DualWing’s innovative chip also incorporates the latest ISO standards of both frequencies to provide the most robust anti-counterfeiting and validation capabilities currently available.

A dual frequency tag has long been anticipated by the marketplace to unleash the full power of RFID. “By providing the tools that extend the RFID value chain to include the ability for brand owners to immediately interact with the end customer is a milestone event for the entire industry,” stated Gary Burns, CEO of . The DualWing is the Swiss Army knife of RFID that delivers maximum utility to organizations with minimal impact to existing systems.

“To combine all the benefits of UHF and NFC into a single chip tag is an elegant solution,” expressed Peter Phaneuf, President of Inc. “To embrace the latest ISO standards for maximum security in both frequencies opens doors to opportunities beyond the retail applications originally targeted and into the pharmaceutical, nutraceutical and healthcare spaces.”

The HF RFID inlay is the latest addition to family of item level intelligence products, which includes software and hardware solutions engineered to capture valuable business data and engage with end customers through smartphones. The DualWing’s full product line is scheduled for large-scale release in wet and dry formats during the third quarter of 2015 from service bureau  converted formats with available customer specific print and encoding schemes.

Chip : QR2213
-          Etched aluminum antenna size : 45*76mm
-          Frequency working : HF 13.56mhz
-          Protocol: ISO 14443
-          User Memory: 384bit
-          7 Byte UID
-          Operating Temperature: -40~70℃
-          Storage Temperature: -20~50℃
Applications:
-  RFID ticket
-  Access control
-  Library and document management
-  Apparel and logistics
-  Pharmacy and healthcare

2016年4月1日星期五

Difference between foundation and anchor RFID bolt tag

RFID blot tag which is with IP67 passive 125KHz or 13.56MHz passive tag. And it is suitable for kinds of RFID asset management, machine identification, vehicle license plate, metal container management ect
Foundation RFID bolt tag are now being used in various industries. The uses of foundation RFID bolt tag depend on the type of the same there are various types of foundation bolts intended for various types of uses. Adding foundation bolts into the concrete through a wooden piece that is placed on top of the foundation helps to stabilize the concrete structure during earthquake.

The foundation RFID bolt tag are of two types, expansion foundation RFID bolt tag and epoxy set foundation bolts. If you have newly built your house the type of bolt you require for successful earthquake retrofitting is expansion RFID bolt tag. They are less costly and are good for areas more prone to earthquake damage. If the foundation is old, adding epoxy RFID bolt tag will work well. They should be deeply added into the concrete to ensure better protection.

The anchor RFID bolt tag are designed to attach objects to the concrete. Numerous types of anchor RFID bolt tag are in use right now. Due to the extensive usefulness, anchor RFID bolt tag are used in all types of projects from a standard building structure to nuclear power plant. Apart from attaching various things to the concrete structure, anchor RFID bolt tag are also used in attaching wood framed walls to the foundation the anchor RFID bolt tag keep the wall falling off the foundation making the walls steadier.

Foundation bolts and anchor RFID bolt tag are presently being used in all commercial as well as residential structure and that is why the demand of both the bolts is at its all time high. There are not much difference between anchor RFID bolt tag and foundation bolts apart from several uses differences. Various manufacturer and suppliers are providing foundation bolts as well as anchor bolts. But since the foundation bolts and anchor RFID bolt tag are related to the security of building structure it is utmost necessary to use best quality foundation RFID bolt tag in order to avoid any kind of mishaps in the building structure.

N& R are the main supplier of RFID passive tag. We provide many types of RFID tags, which including RFID key fob, RFID wristband, RFID luggage tag, NFC sticker, RFID label, coin token, RFID laundry tag, tire tag, bolt tag ect.