The RFID inlay is made up of two components?

RFID inlay -- which is often no more than a grain of rice -- could be the functional part of an RFID tag's label that encodes the identifying information. The RFID inlay uses rf waves to relay information with a laptop or computer by using an RFID reader.

Types
RFID inlays are called "wet" or "dry." RFID inlays are viewed "wet" if an adhesive is applied towards the inlay to stick it into a pressure-sensitive liner that comprises the label. Inlays are believed "dry" if the inlay is coupled to the label without using an adhesive.

Components
The RFID inlay is made up of two components. An internal circuit or microchip that stores personal identifying information attaches with a small coil of aluminum, copper or silver wires referred to as antenna, which transmits and receives radio frequency signals. The microchip and antenna are then added to a label, along with the entire unit is encased in plastic.

The Ins And Outs
Data from your microchip passes to the RFID tag's antenna, where it really is read through the antenna associated with an RFID reader and passed onto a number pc for archival purposes, processing or analysis.

http://www.nfcandrfid.com/products_info/RFID-wet-dry-inlay-319918.html